International Journal on Magnetic Particle Imaging IJMPI
Vol. 10 No. 1 Suppl 1 (2024): Int J Mag Part Imag
https://doi.org/10.18416/IJMPI.2024.2403037

Proceedings Articles

Simulation of a Modular Coil Unit for a Preclinical MPI Scanner

Main Article Content

Jonas Schumacher (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE), Eric Aderhold (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE, Lübeck, Germany), Pascal Stagge (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE, Lübeck, Germany), Mandy Ahlborg (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE, Lübeck, Germany), Thorsten M. Buzug (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE, Lübeck, Germany), Matthias Graeser (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE, Lübeck, Germany)

Copyright (c) 2024 Jonas Schumacher, Eric Aderhold, Pascal Stagge, Mandy Ahlborg, Thorsten M. Buzug, Matthias Graeser

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Abstract

The adoption of preclinical Magnetic Particle Imaging (MPI) as a standard technique in research heavily relies on the availability of scanners with a low entry barrier. One of the barriers is the infrastructure demand of such a system in terms of space, electric supply power and cooling. Scanners that try to tackle this require power-efficient transmit coil assemblies. Here, the design process of such a set of coils is presented and the optimization steps are discussed. With a total power loss of 1.2 kW for the drive and focus fields and a field of view (FoV) of 33.8 mm at 5 T/m the whole system can potentially be powered from a single power outlet.

Article Details

Most read articles by the same author(s)

<< < 2 3 4 5 6 7 8 > >>